Regression testing fixes

Fix guard around inclunde of chacha20_poly1305.h in internal.h for when
session ticket is not ChaCha20-Poly1305.

Fix port allocation and readiness testing in scripts.
Fix other issues in the scripts as well.
Update test.h code around ready file.

For LTO compiles, all functions must be used.
Make sure the assembly functions are marked as 'used' when not called
internally.

Fix a race in the example client that intermittently failed
scripts/unit.test on TLS 1.3 non-blocking session resumption.

RISC-V 64-bit: s0 needed but functions need to omit frame pointer.

Have source matching generated code again.

Author: SparkiDev

cmake/functions.cmake

@@ -468,6 +468,10 @@ function(generate_lib_src_list LIB_SOURCES)
 
             if(BUILD_AESNI)
                 list(APPEND LIB_SOURCES wolfcrypt/src/aes_asm.S)
+                # 32-bit x86 AES-XTS. The file guards its own contents on
+                # WOLFSSL_AES_XTS and WOLFSSL_X86_BUILD, so it compiles to
+                # nothing on any other target or without XTS.
+                list(APPEND LIB_SOURCES wolfcrypt/src/aes_xts_x86_asm.S)
 
                 if(BUILD_INTELASM)
                     list(APPEND LIB_SOURCES wolfcrypt/src/aes_gcm_asm.S)
@@ -914,9 +918,13 @@ function(generate_lib_src_list LIB_SOURCES)
         endif()
 
         if(NOT BUILD_FIPS_V2 AND BUILD_AESNI)
+            # aes_xts_x86_asm.S guards its own contents on WOLFSSL_AES_XTS and
+            # WOLFSSL_X86_BUILD, so it compiles to nothing on any other target
+            # or without XTS.
             list(APPEND LIB_SOURCES
                 wolfcrypt/src/aes_asm.S
-                wolfcrypt/src/aes_gcm_asm.S)
+                wolfcrypt/src/aes_gcm_asm.S
+                wolfcrypt/src/aes_xts_x86_asm.S)
         endif()
 
         if(BUILD_CAMELLIA)

configure.ac

@@ -1215,10 +1215,13 @@ if (test "$host_cpu" = "x86_64" || test "$host_cpu" = "amd64") &&
 then
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_X86_64_BUILD"
 fi
-if test "$host_cpu" = "x86"
-then
+# config.sub normalises 32-bit x86 to i386/i486/i586/i686, so matching only
+# "x86" never fires for a real host triple.
+case "$host_cpu" in
+  x86 | i?86)
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_X86_BUILD"
-fi
+    ;;
+esac
 
 
 AC_ARG_ENABLE([leanpsk],
@@ -4801,11 +4804,12 @@ then
     then
         AM_CCASFLAGS="$AM_CCASFLAGS -DWOLFSSL_X86_64_BUILD"
     fi
-    if test "$host_cpu" = "x86"
-    then
+    case "$host_cpu" in
+      x86 | i?86)
         AM_CCASFLAGS="$AM_CCASFLAGS -DWOLFSSL_X86_BUILD"
         ENABLED_X86_ASM=yes
-    fi
+        ;;
+    esac
 fi
 AC_SUBST([ENABLED_AESNI])
 AC_SUBST([ENABLED_AESNI_WITH_AVX])

examples/client/client.c

@@ -89,6 +89,9 @@ static const char *wolfsentry_config_path = NULL;
 #ifndef MAX_NON_BLOCK_SEC
 #define MAX_NON_BLOCK_SEC   10
 #endif
+/* How long a single wait for the socket blocks before the loop re-checks its
+ * overall budget. Short enough that the budget is still honoured closely. */
+#define NON_BLOCK_POLL_SEC  1
 
 #define OCSP_STAPLING 1
 #define OCSP_STAPLINGV2 2
@@ -1124,12 +1127,28 @@ static int ClientWrite(WOLFSSL* ssl, const char* msg, int msgSz, const char* str
     return err;
 }
 
-static int ClientRead(WOLFSSL* ssl, char* reply, int replyLen, int mustRead,
-                      const char* str, int exitWithRet)
+/* Read a reply. On a non-blocking socket a WANT_READ only means the reply has
+ * not arrived yet, so wait for it rather than returning on the first poll -
+ * returning early lets the caller shut the connection down while the peer is
+ * still writing, which the peer then reports as a transport error.
+ *
+ * replyRequired says whether a missing reply is a failure, not whether one is
+ * worth waiting for: it selects the wait budget and controls whether giving up
+ * is reported as an error. */
+static int ClientRead(WOLFSSL* ssl, char* reply, int replyLen,
+                      int replyRequired, const char* str, int exitWithRet)
 {
     int ret, err;
     char buffer[WOLFSSL_MAX_ERROR_SZ];
     double start = current_time(1), elapsed;
+    /* A required reply gets the full non-blocking budget, an optional one the
+     * shorter of the two - MAX_NON_BLOCK_SEC is overridable and may be set
+     * below DEFAULT_TIMEOUT_SEC, which would otherwise invert the two. */
+    double maxWait = MAX_NON_BLOCK_SEC;
+
+    if (!replyRequired && DEFAULT_TIMEOUT_SEC < MAX_NON_BLOCK_SEC) {
+        maxWait = DEFAULT_TIMEOUT_SEC;
+    }
 
     do {
         err = 0; /* reset error */
@@ -1158,17 +1177,49 @@ static int ClientRead(WOLFSSL* ssl, char* reply, int replyLen, int mustRead,
             }
         }
 
-        if (mustRead &&
-            (err == WOLFSSL_ERROR_WANT_READ
-             || err == WOLFSSL_ERROR_WANT_WRITE)) {
+        if (err == WOLFSSL_ERROR_WANT_READ
+             || err == WOLFSSL_ERROR_WANT_WRITE) {
+            int selectRet;
+
             elapsed = current_time(0) - start;
-            if (elapsed > MAX_NON_BLOCK_SEC) {
-                LOG_ERROR("Nonblocking read timeout\n");
+            if (elapsed > maxWait) {
+                if (replyRequired) {
+                    LOG_ERROR("Nonblocking read timeout\n");
+                }
+                ret = WOLFSSL_FATAL_ERROR;
+                break;
+            }
+
+            /* Wait for the socket instead of spinning on it. */
+            if (err == WOLFSSL_ERROR_WANT_WRITE) {
+                selectRet = tcp_select_tx(wolfSSL_get_fd(ssl),
+                                          NON_BLOCK_POLL_SEC);
+            }
+            else {
+                selectRet = tcp_select(wolfSSL_get_fd(ssl),
+                                       NON_BLOCK_POLL_SEC);
+            }
+
+        #ifdef WOLFSSL_DTLS
+            /* A DTLS timeout means the peer's datagram was lost - let the
+             * library retransmit rather than waiting for something that is
+             * never coming (see NonBlockingSSL_Connect). */
+            if (selectRet == TEST_TIMEOUT && wolfSSL_dtls(ssl)) {
+                if (wolfSSL_dtls_got_timeout(ssl) != WOLFSSL_SUCCESS) {
+                    err = wolfSSL_get_error(ssl, WOLFSSL_FATAL_ERROR);
+                    break;
+                }
+            }
+            else
+        #endif
+            /* select() itself failed - retrying would spin, not wait. */
+            if (selectRet == TEST_SELECT_FAIL) {
+                LOG_ERROR("%s tcp_select error\n", str);
                 ret = WOLFSSL_FATAL_ERROR;
                 break;
             }
         }
-    } while ((mustRead && err == WOLFSSL_ERROR_WANT_READ)
+    } while (err == WOLFSSL_ERROR_WANT_READ
         || err == WOLFSSL_ERROR_WANT_WRITE
     #ifdef WOLFSSL_ASYNC_CRYPT
         || err == WC_NO_ERR_TRACE(WC_PENDING_E)
@@ -1183,11 +1234,15 @@ static int ClientRead(WOLFSSL* ssl, char* reply, int replyLen, int mustRead,
     return err;
 }
 
+/* replyRequired: whether a missing reply fails the exchange. See ClientRead. */
 static int ClientWriteRead(WOLFSSL* ssl, const char* msg, int msgSz,
-        char* reply, int replyLen, int mustRead,
+        char* reply, int replyLen, int replyRequired,
         const char* str, int exitWithRet)
 {
     int ret = 0;
+    /* Which half of the exchange the error below came from - the message used
+     * to say SSL_write for a failure returned by ClientRead. */
+    const char* stage = "SSL_write";
 
     do {
         ret = ClientWrite(ssl, msg, msgSz, str, exitWithRet);
@@ -1207,15 +1262,17 @@ static int ClientWriteRead(WOLFSSL* ssl, const char* msg, int msgSz,
             }
             else {
                 LOG_ERROR("%s tcp_select error\n", str);
+                stage = "tcp_select";
                 if (!exitWithRet)
                     err_sys("tcp_select failed");
                 else
                     ret = WOLFSSL_FATAL_ERROR;
                 break;
             }
         }
-        ret = ClientRead(ssl, reply, replyLen, mustRead, str, exitWithRet);
-        if (mustRead && ret != 0) {
+        stage = "SSL_read";
+        ret = ClientRead(ssl, reply, replyLen, replyRequired, str, exitWithRet);
+        if (replyRequired && ret != 0) {
             if (!exitWithRet)
                 err_sys("ClientRead failed");
             else
@@ -1224,9 +1281,11 @@ static int ClientWriteRead(WOLFSSL* ssl, const char* msg, int msgSz,
         break;
     } while (1);
 
-    if (ret != 0) {
+    /* A failed optional read is not an error - the caller asked for the reply
+     * only if one turned up - so do not log one. */
+    if (ret != 0 && (replyRequired || XSTRCMP(stage, "SSL_read") != 0)) {
         char buffer[WOLFSSL_MAX_ERROR_SZ];
-        LOG_ERROR("SSL_write%s msg error %d, %s\n", str, ret,
+        LOG_ERROR("%s%s msg error %d, %s\n", stage, str, ret,
                                         wolfSSL_ERR_error_string((unsigned long)ret, buffer));
     }
 

scripts/benchmark.test

@@ -42,17 +42,20 @@ if [ "$#" -lt 2 ]; then
     exit 1
 fi
 
-# Use unique benchmark port so it won't conflict with any other tests
-bench_port=11113
+# Bind an ephemeral port and read it back from the ready file below, rather
+# than hoping a fixed number is free. The ready file is per-run for the same
+# reason - a fixed path is shared by any concurrent run.
+bench_port=0
+ready_file=/tmp/wolfssl_server_ready$$
 no_pid=-1
 server_pid=$no_pid
 counter=0
 client_result=-1
 
 remove_ready_file() {
-    if test -e /tmp/wolfssl_server_ready; then
+    if test -e "$ready_file"; then
         echo "removing existing server_ready file"
-        rm /tmp/wolfssl_server_ready
+        rm "$ready_file"
     fi
 }
 
@@ -85,27 +88,39 @@ remove_ready_file
 if [ $1 -eq 1 ]
 then
     # start server in loop mode with port
-    ./examples/server/server -i -p $bench_port $4 &
+    ./examples/server/server -i -p $bench_port -R "$ready_file" $4 &
     server_pid=$!
 fi
 
 # benchmark throughput
 if [ $1 -eq 2 ]
 then
     # start server in loop mode, non-blocking, benchmark throughput with port
-    ./examples/server/server -i -N -B $2 -p $bench_port $4 &
+    ./examples/server/server -i -N -B $2 -p $bench_port -R "$ready_file" $4 &
     server_pid=$!
 fi
 
 # NOTE: We sleep for 2 seconds below. If timing the execution of this script
 #       with "time", bear in mind that those 2 seconds will be reflected in
 #       the "real" time.
 echo "Waiting for server_ready file..."
-while [ ! -s /tmp/wolfssl_server_ready -a "$counter" -lt 20 ]; do
+while [ ! -s "$ready_file" -a "$counter" -lt 20 ]; do
     sleep 0.1
     counter=$((counter+ 1))
 done
 
+if [ ! -s "$ready_file" ]; then
+    echo "Server never reported a port!"
+    do_cleanup
+    exit 1
+fi
+
+# sleep for an additional 0.1 to mitigate race on write/read of $ready_file:
+sleep 0.1
+
+bench_port=$(cat "$ready_file")
+echo "Server listening on port $bench_port"
+
 # benchmark connections
 if [ $1 -eq 1 ]
 then